KAC-7204
Stereo/Bridgeable Power Amplifier
| Sound enthusiasts buy Kenwood amps for their superior quality, and the KAC-7204D is no exception. This compact 2-channel amplifier features a sturdy cast-aluminum chassis that is 30% smaller than last year’s model and supplies 1000 Watts Max Power. Built-in high-pass and low-pass filters adjust the amplifier output so you’ll get the best sound possible from your speakers and subs. | |
| |
| • | CEA Rated: 170W X 2 (1.0% THD+N) (4Ohm/2Ch) | | • | 250 Watts x 2 (2 ohm)/500 Watts x 1 (4 Ohm Bridged) | | • | High Quality Speaker Level Input | | • | Blue Illumination | | • | High-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz | | • | Variable Bass Boost Control(0-18 dB at 40 Hz) | | • | Cooling Fan | | • | MOSFET power supply | | • | Speaker-level inputs with signal sensing turn-on | | • | Preamp-level inputs and outputs | | • | Fuse rating: 40A x 1 | | • | 13-3/4"W x 2-1/4"H x 9-3/8"D |
|
| Amplifier Type | Class-AB | | Band Reject Filter | - | | Band Reject Filter Frequency | - | | Bass Boost Circuit | - 18 dB (Variable) | | Bass Boost Frequency | 40Hz | | Channel Design | 2-Channel | | Cooling System | Slient Fans | | Current Consumption | 40A | | Delay Control | - | | Frequency BAND 1 (Front, Rear) | - | | Frequency BAND 2 (Front, Rear) | - | | Frequency BAND 3 (Front, Rear) | - | | Frequency BAND 4 (Front, Rear) | - | | Frequency BAND 5 (Front, Rear) | - | | Frequency Response | 5K - 50Hz | | Gain (Boost or Cut) | - | | High-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range50-200Hz (Variable)
High Range50-200Hz (Variable) | | Infrasonic Filter | ,,,Hz-,,,Hz (Selectable), -24dB/oct | | Input Impedance | 10  | | Inputs | 1 x RCA & High-Level | | Installation Size (W x H x D) | 13-3/4" x 2-5/16" x 9-3/8"
350 mm x 59 mm x 238 mm | | Installer Memory |  | | LED Information Display | Voltage, Current, Temperature | | Low-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range50-200Hz (Variable)
High Range50-200Hz (Variable) | | Maximum Output Power | 1000 Watts | | Operating Voltage | 14.4 V (11 - 16 V Allowable) | | Output | 1-channel RCA | | Phase Inverter | - | | Power Supply | Single Power Supply | | Power Wire Gauge | 4-Gauge | | Protection Circuit | Yes | | Quality Factor BAND 1 - BAND 3 | - | | Quality Factor BAND 4 - BAND 5 | - | | Rated Output Power | Rated Power Output(12.0V)
4Ω -W x -
2Ω -W x -
Bridged4Ω -W x -
1Ω -W x -
Rated Power Output(14.0V)
4Ω 170W x 2
2Ω 250W x 2
Bridged 4Ω 500W x 1
1Ω -W x - | | Remote Bass Control | - | | RMS Power Output | 170 Watts × 2 (1%THD+N) (4Ω) | | Sensitivity | 0.2V - 5.0V | | Signal-to-Noise Ratio | 100dB
83dBA (Ref: 1 Watt into 4) | | Speaker Wire Gauge | 12-Gauge | | Terminal Layout | One-Sided | | WARRANTY | 1 - Year Parts & Labor | | Weight | 7 lbs (3.2 kg) |
|
|